Aaaa bbb c d T e fffff g h ii lll mmm lll mmm lll mmm lll mmm lll mmm lll mmm

Aaaa:	Serving Channel Info A: type (B=BCCH, S=SDCCH, F=Frequency, T=TCCH) BCCH (Broadcast Control CHannel) - broadcast information SDCCH (Standalone Dynamic Control CHannel) - call setup TCCH (Traffic Control CHannel) - during conversation mode aaa: number of the channel used in communication with cell (CH), HOP=Hopping
bbb:	level of reception in dBm (RxL)
c:	PowerLevel in tx (TxPwr)
d:	Rate of transmission errors with DTX enabled (RxQualSub)
T:	Timeslot in use (TS)
e:	Timing Advace (TA)
fffff:	Local Area Code in hex (LAC)
g:	Rate of transmission errors with DTX disabled (RxQualFull)
h:	Used Codec (E=EFR, F=Full Rate, H=Half Rate)
ii:	Base Station Identity Code value of serving channel (BSIC)
lll:	number of the channel of adjacent cells
mmm:	C1 value of adjacent cells

New Ericssons (Level 2)

aaa1 bbb1 cc1 dd1 aaa2 bbb2 cc2 dd2 aaa3 bbb3 cc3 dd3 aaa4 bbb4 cc4 dd4 aaa5 bbb5 cc5 dd5

aaan:	number of the channel of adjacent cell #n
bbbn:	level of reception in dBm of adjacent cell #n
ccn:	C1 value adjacent cell #n
ddn:	C2 value adjacent cell #n

New Ericssons (Level 3)

Shows the rest of adjacent cells channel # monitored

Old Ericssons

Aaaa bb cc d e ff

Aaaa:	Serving Channel Info A: type (B=BCCH, S=SDCCH, F=Frequency, T=TCCH) BCCH (Broadcast Control CHannel) - broadcast information SDCCH (Standalone Dynamic Control CHannel) - call setup TCCH (Traffic Control CHannel) - during conversation mode aaa: number of the channel used in communication with cell (CH), HOP=Hopping
bb:	Level of reception in dBm (RxL + 110dBm)
cc:	Transmit level (max value = 33). Value is always 33 during the initial
d:	Time slot number in use. Always zero in standby mode.
e:	RX Quality/Bit Error Ratio. A value of "0" means no errors (best reception). Range is 0-7.
ff:	Timing Advance. Distance to the BTS (in kms) can be calculated by multiplying the number by 1.11 and dividing the result by 2.